Hybrid View
-
22-01-2022 #1
That's the "Box of chocolates with no lid" problem I mentioned in an earlier post, you never know what you are going to get or what will happen when you start taking it apart or modifying castings, etc.
Then if you are lucky enough that it doesn't let go when converting there is no saying it won't shapeshift when being used because it was never designed to handle the forces CNC is imparting on the chassis.?
Why anyone would want to invest the best part of £5k and 100+ hours of time into a machine that could shapeshift at random is beyond my understanding.! It's like playing Russian roulette with a full revolver.-use common sense, if you lack it, there is no software to help that.
Email: [email protected]
Web site: www.jazzcnc.co.uk
-
23-01-2022 #2
I was recently trawling Youtube and came across a channel called Ades Workshop - this guy bought a Warco 16B machine which looks reasonable both in terms of cost and quality
His output looks ok from a hobbyist persepective - so my idea now taking on many of the above comments is to buy a machine akin to the 16B, fit a DRO and then use that to make a purpose but smaller CNC milling machine similar but Jazzcnc but smaller
-
23-01-2022 #3
Sounds like you have a plan.
Buy a mill to make a mill/router.
I'd draw up some of the new machine first. Then you'll know which size Mill to get. Don't want to end up with something too small.
Warco16b & Amadeal 25L are effectively the same machine.
I've recently been looking at TBI C5 ballscrews for my 25L. I better get some cutting done so the machine can pay for them. They're tempting.Last edited by dazp1976; 23-01-2022 at 03:58 PM.
-
23-01-2022 #4
Thread Information
Users Browsing this Thread
There are currently 7 users browsing this thread. (0 members and 7 guests)
Similar Threads
-
mill with no quill conversion
By mcmental76 in forum Milling Machines, Builds & ConversionsReplies: 2Last Post: 21-08-2021, 06:00 AM -
CNC conversion AMAT25LV AMAT30LV WM18 advice needed for total novice
By Hulksmash in forum Milling Machines, Builds & ConversionsReplies: 19Last Post: 18-12-2018, 12:31 PM -
CONVERSION: Sx3 mill conversion
By dazza in forum Conversion Build LogsReplies: 1Last Post: 29-04-2014, 10:23 AM -
Mill conversion to cnc
By wolsey in forum General DiscussionReplies: 1Last Post: 15-08-2011, 11:07 PM -
Help with drill-Mill conversion
By Ross77 in forum Milling Machines, Builds & ConversionsReplies: 134Last Post: 02-04-2010, 10:25 AM
Bookmarks