-
23-01-2022 #1
Hi all,
I currently have a Boxford VMC190 which has been converted to Mach4. My problem is the spindle speed is too slow for machining very small parts, I believe it runs at max of approx 2600rpm. I am therefore looking to upgrade to a more rigid machine with larger footprint.
If you have anything that may be of use please get in touch.
Regards
Steven
-
23-01-2022 #2
Have you considered fitting a secondary higher speed spindle alongside, for smaller, higher speed work? A router or high speed cartridge perhaps. I'm not speaking from experience, just observing what others have done.
-
23-01-2022 #3
I stripped down the current spindle to see if I could up the rpm but never actually thought of adding 2nd spindle.. Shall look into as another option.
Thanks.
-
23-01-2022 #4
Here's an example
-
The Following 2 Users Say Thank You to Muzzer For This Useful Post:
-
25-01-2022 #5
The 1.5kw spindle looks like it may fit on the side of the head but in the back of my mind I am wondering if I could possibly utilise the original headstock and replace the original motor. It would be interesting to know how good the original bearings are and if they could take the extra rpm.
Regards
Steven
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
4Axis 0.8KW Router Engraving Machine Milling Drilling Engravor 3040 CNC Machine
By KeithElcomb in forum Chinese MachinesReplies: 0Last Post: 27-09-2017, 12:32 PM -
Larger Open CNC Design
By Tenson in forum General DiscussionReplies: 2Last Post: 17-07-2017, 04:51 PM -
larger stepper motor needed
By terry1956 in forum General ElectronicsReplies: 7Last Post: 29-05-2017, 05:35 PM -
larger home made milling spindles - NMTB/ R8 taper?
By jonnydeen in forum Tool & Tooling TechnologyReplies: 6Last Post: 13-09-2012, 11:17 AM
Bookmarks