Help Mach3

[dazp1976]

Hi,
I contacted Geko and they will not repair due to costs. I dont want to buy a new one incase I have the same problem
This is what I have, but the break out board has a parallel port connection.
https://bulkman3d.com/product/mach3-...roller-bundle/

Mike

I wouldn't touch a TB6600 driver (or this whole kit) with a bargepole!!!!.
DM556 from stepperonline all the way.

So. Are you saying you have that kit but don't have the STB5100 cotroller, just the stepper driver board and generic 5 axis parallel bob?.

One would assume that you could get a jst-xh cable and link the 2 boards that way.
Have to check the manuals to see if the wire order is correct but the little connectors inside the white plugs are easy to swap around.