Help Mach3

[Mikes Planes]

Hi,
Sorry foe being so long to say thank you all in last post now working. Sorry stiil have problems. I have wired all axis up but Z only go's up I have tried plugs and pin and also looked in Homing and limits no luck.

Mike

[dazp1976]

Hi,
Sorry foe being so long to say thank you all in last post now working. Sorry stiil have problems. I have wired all axis up but Z only go's up I have tried plugs and pin and also looked in Homing and limits no luck.

Mike

Broken wire or pin between controller and driver DIR terminal?.
Controlling the stepper DIR simply works by switching the 5v on or off to the drive DIR terminal. So a broken wire is the first place I'd start.