sorotec compact line

[JAZZCNC]

Hello Jazz, thank you for the offer i'm still in the planning stage at the moment, I have most of the components so its just the frame which I will either buy or make, linear rails are one thing that I'm missing do you stock these?
First of all I need to make space in the garage as a large mechmate lives in there at the moment which needs to be sold. Thanks Andrew

Ok, so your not really looking to buy the Sorotec kit which comes with all the mechanical components, basically, you just want to see how it's built so you can copy it.?

No, sorry we don't stock linear rails or ball-screws, well technically we do but these are for the machines we sell and are machined to suit.

[epson]

Ok, so your not really looking to buy the Sorotec kit which comes with all the mechanical components, basically, you just want to see how it's built so you can copy it.?

No, sorry we don't stock linear rails or ball-screws, well technically we do but these are for the machines we sell and are machined to suit.

No not at all, I am looking at the sorotec compact line or alu-line if I am to purchase a kit. But if I go down the self build road I will probably build the Robocnc machine as i have access to extrusion at work. I don't think throwing accusations around is fair just because I don't want to purchase your machine.

[JAZZCNC]

I don't think throwing accusations around is fair just because I don't want to purchase your machine.

You misunderstand me I wasn't accusing you of anything, it's actually very common for people to copy other people's designs or parts of, as many have done my designs. The comment was based on the fact you were looking for Sorotec build manuals and saying you already had all the components and just need linear rails. Which I do think is a fair assumption.

Regards you not purchasing one of my machines then the honest truth is I don't care, I never push to sell and I'm more than happy to help people self-build which I have done 1000's times before with people from all around the world.

Anyway, whichever way you go good luck.

[AndyGuid]

No not at all, I am looking at the sorotec compact line or alu-line if I am to purchase a kit. But if I go down the self build road I will probably build the Robocnc machine as i have access to extrusion at work. I don't think throwing accusations around is fair just because I don't want to purchase your machine.

Jazz certainly wasn't accusing you of anything, he's just trying to establish what your intentions are, so he can best help.

Over the many years I've been on this forum, Jazz has protected many folk from themselves and their preconceived ideas.

Look forward to your DIY build thread if that's what you decide to do!