-
02-03-2022 #1
Hi Guys,
i hope this is ok for me to post here.
we are currently trying to get rid of our Rye MG2400 Twin Head CNC 8ft by 4ft, its been very reliable for us over the 13 years we have ran this machine but unfortunitly it has developed a fault on the X-Axis where the auto greeser failed and caused the bearings to gouge the rails resulting in juddering that if ran at full speed gives a overload error.
as this machine is no longer needed as we have upgraded to a newer machine.
Machine set-up as below:
2no. Perske 4.8Kw (17,500 rpm) spindles (Manual tool change). both very good condition with smooth rotation
2no. Pneumatic Drillings Heads (Manual tool change).
Bed Size: 8 Ft x 4 Ft.
Comes with operation & programming manual
Upgraded control system by CNC support.
VACUUM PUMP NOT INCLUDED
https://www.ebay.co.uk/itm/RYE-MG2400-8FT-BY-4FT-Flatbed-CNC-SPARES-REPAIRS-ONLY
Thanks
RyanLast edited by PG-Ryan; 14-03-2022 at 10:24 AM. Reason: Link updated / Relisted
-
14-03-2022 #2
Still available and relisted
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Rye cnc twin head quantum midi
By Sean F in forum Rye CNC RoutersReplies: 4Last Post: 21-07-2020, 02:28 PM -
eBay: FOR SALE Wadkin ..Twin head two air drills router £499 start no reserve
By Abbeyint in forum Items On eBay UKReplies: 0Last Post: 14-01-2019, 06:29 PM -
twin drive
By universally in forum Gantry/Router Machines & BuildingReplies: 6Last Post: 19-01-2015, 08:00 AM -
FOR SALE: AXYZ 6012 - 4mtr x 2mtr Twin Head CNC FOR SALE
By daverowland in forum Items For SaleReplies: 7Last Post: 28-06-2013, 06:18 PM -
Twin X axis Drives
By Hobbit in forum Gantry/Router Machines & BuildingReplies: 4Last Post: 20-02-2009, 08:22 AM
Bookmarks