Quote Originally Posted by Muzzer View Post
In my case, I'm forever having to top it up with water to make up for evaporative losses -
Tell me about it, you should see the losses we get on our Hurco VMC. Between hot parts and a high-pressure coolant system, we are forever topping up the coolant, it's surprising how much you can lose just on the parts, even after blowing them off with air.!

But our biggest challenge and pain in the arse is contamination from the way-lube oil which is pumped to the linear bearings and ball-screws. It's a nightmare because while I can control the time the pump is on through the controls PLC I can't have it off for too long for the risk of killing the linear bearings so we get a film of oil on top of the coolant.

I'm trying to come up with a simple oil skimmer, so any ideas will be greatly appreciated.?