-
07-04-2022 #1
Hello CNCers,
I've just had this land in my lap.. and given the cursory comment of... can you find me some of this..
clearly, I know nothing about it...
It's got no makers marks or part numbers on it...
it's lovely and ground on all the working surfaces..
I've had a good day's worth of looking on the internet.. and I'm 50/50 on does this has a truck that fits it.. or is it more like a sideway and gib strip setup ..
oh and I've no idea if it might use rollers.. (I'd think so with the shape of the surfaces) but finding something in a catalogue is not proving very easy...
so the real hope with asking the hive mind is that someone recognises it... and goes that's a Matusumi XYZ rail ... i use it all the time..
anyway, thanks in advance..
Pb
oh, and if I find out.. I'll put it up... :-)
-
07-04-2022 #2
I've no idea of the manufacturer but I can tell you it uses linear ROLLER carriages rather than the more common ball bearings type carriages so it's most likely from a high-end machine and most likely a Milling machine if it's a short length.
But to be honest I think you are looking for a needle in a haystack without any markings.?-use common sense, if you lack it, there is no software to help that.
Email: [email protected]
Web site: www.jazzcnc.co.uk
-
11-04-2022 #3
it dawned on me that some more actual pictures might help..
so here are some ...
hope this gives you some idea..
I've gone back to the customer and asked for a bit more info on what the truck / moving element looks like, as I'm able to find lots of things that measured at 35mm but 36mm seems a strange one..
anyway thanks for anyone who looks at this..
it might be that i get the grinder fired up and some steel cooking in the oven ..
Pb.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
APT High speed, high hardness end mills - anyone used them?
By Voicecoil in forum Metalwork DiscussionReplies: 16Last Post: 18-04-2020, 10:26 PM -
FOR SALE: 20mm and 25mm INA and THK carriages and some rail.
By Nealieboyee in forum Items For SaleReplies: 2Last Post: 17-02-2020, 09:06 PM -
25mm Round Rail @ 400mm L
By Lee Roberts in forum Items WantedReplies: 0Last Post: 30-03-2016, 10:41 PM -
FOR SALE: 25mm round rail bearing blocks
By D-man in forum Items For SaleReplies: 1Last Post: 31-10-2011, 09:26 AM -
FOR SALE: Open End 3M HTD Rubber belt 15mm wide
By wiatroda in forum Items For SaleReplies: 0Last Post: 22-06-2011, 03:49 PM
Bookmarks