Unimatic EduCAM 10 for sale

**marbles** · 28-04-2022

Unimatic EduCAM 10 for sale
model CNC-PPM-0322

580 x 580 x 760mm
Approx 60kg

Comes with Galaad cam software and the all important usb dongle licence key required to operate the machine. Manual and pack of spanners & collets etc.

I got it for making smaller parts but never got round to using it. The intention was to convert it over to run Mach3 so I have set of drivers and BB for it. I have too much stuff so it needs to go. I've finally powered it up and tested all axis and spindle and the unit seems fine

! Travel is smooth and no smoke or noisy fans. Has been PAT tested. Its a nice German built unit which can apparently cut aluminium with the proper toolpath and workholding. The machine tables are made of T-nut profiles providing optimal clamping possibilities. The enclosure has been designed with a hoover/ extraction port at the back for dust/fume removal.

I also have a set of digital DM556 drivers and a break out board for a conversion if they are of interest as an additional sale.

Looking for around £750 for Unimatic EduCAM 10 and software.

Collection only from Glasgow.