Thread: 3018 X axis play
Threaded View
-
09-05-2022 #1
I was going to embark on an electronics project and discovered the world of p.c.b engraving, intrigued by this I got myself a Vevor 3018 CNC.
After a bit of playing I managed to create a test p.c.b. using KiCAD, Flatcam and Candle. Great I thought and then set about making a proper board, things went south at this point. I could not get any consistency with the engraving, sometimes it would work really well and other times there would be bare board where a track should have been. I put the p.c.b. to one side and thought I would try and make a front panel out of ABS for something I built earlier. Using FreeCAD and Candle I managed to ‘mill’ one although it was a bit of a mare as the plastic kept melting and sticking to the end mill, but I got there in the end.
Back to p.c.b. I took the CNC apart to clean out all the plastic dust that had built up and noticed that the X axis has some play between the linear bearings and the guide rails, and a bit of play in one of the vertical bars of the Z axis. I figured this may be the cause of the inconsistency and to prove it I fed some PTFE tape through the bearings and taped the ends around the back of the motor unit and put a piece of tape in the hole of the Z axis bar and that took the slack out. When I fire up the machine I was surprised as to how much quieter it was and I managed to engrave a test p.c.b.
I have read some articles on the internet implying that there are upgrade kits and super duper bearings out there to solve the issue, but I can’t seem to find a supplier or know with confidence what I am looking for, any help would be gratefully received.
Thought I would add a picture of the PTFE fix, subsequently found play in the Z axis fixed as well.
T.I.A.
AshleyLast edited by Ash; 14-05-2022 at 06:48 PM. Reason: Adding pictures
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
CNC 3018 Pro - Z Axis Stability improvement idea..
By richardsenior in forum Chinese MachinesReplies: 8Last Post: 25-10-2020, 09:55 AM -
3018 Pro 3 Axis Mini DIY CNC Router problem
By shorty1905 in forum Chinese MachinesReplies: 2Last Post: 29-07-2020, 07:53 AM -
3018 3 Axis Mini DIY CNC Router ONLY £125 with free shipping !!!
By Lee Roberts in forum Marketplace DiscussionReplies: 6Last Post: 09-01-2020, 09:00 PM -
Play in my mount
By CrazeUK in forum Rails, Guideways & BearingsReplies: 11Last Post: 03-03-2017, 06:27 PM -
Should my Z axis have a little play in it?
By Philly in forum Gantry/Router Machines & BuildingReplies: 7Last Post: 29-04-2011, 04:28 AM
Bookmarks