Thread: Cuts are offline
-
15-05-2022 #1
I have just cut some slots for some clamps, the through cuts worked fine. I then ran a shallow cut for bolts outside the vector using the same vector and they where offline. I screwed the mdf down so it didnt move, any ideas why it didnt line up.
-
15-05-2022 #2
Give us a bit more info.
#1 What was the vector. Single straight line or a Slot.?
#2 Was it the same tool size and number.
#3 Did you move material or reset X/Y zero.
#4 What software
Pics would be good-use common sense, if you lack it, there is no software to help that.
Email: [email protected]
Web site: www.jazzcnc.co.uk
-
15-05-2022 #3
It was a 7mm slot with semi circles at both ends, it was the same tools. I set the xyz between runs and the software is v carve pro. The material was screwde to the waste board. I will have to check if the waste board moved maybe.
-
15-05-2022 #4-use common sense, if you lack it, there is no software to help that.
Email: [email protected]
Web site: www.jazzcnc.co.uk
-
15-05-2022 #5
if I was routering inside and outside the same vector should I rehome and re touch probe inbetween each process.
-
15-05-2022 #6
If you don't move the material or part then you don't need to reset anything other than the Z height if you changed the tool. If you use the same tool then you don't need to do anything, just run your new code (provided you set the same X Y position in CAM)
If you move the material or part then you need to reset all axis.-use common sense, if you lack it, there is no software to help that.
Email: [email protected]
Web site: www.jazzcnc.co.uk
-
15-05-2022 #7
Great thanks for your help
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Problem using cnc3018 with offline controller
By gikkalan in forum Chinese MachinesReplies: 4Last Post: 11-07-2021, 05:33 AM -
NEW MEMBER: Offline CNC controller
By IanAngus in forum New Member IntroductionsReplies: 5Last Post: 28-01-2020, 12:10 PM -
DDSCV1.1 3 and 4 axis offline motion controller
By Boyan Silyavski in forum Chinese Stand-aloneReplies: 267Last Post: 14-05-2018, 06:57 PM -
Offline CNC Programmer Position for Arbroath based Oil Tool Manufacturer
By Pioneer Oil Tools Ltd in forum Opportunities Available & SoughtReplies: 3Last Post: 31-07-2017, 04:22 PM -
RFQ: Offline Programming, Small batch Milling work, Cad design
By lacroft1 in forum Projects, Jobs & RequestsReplies: 0Last Post: 25-02-2015, 07:51 AM
Bookmarks