Good Day All,

Sorry If this is in thr wrong section.

I have a home built CNC router running mach 3. Was built in 2011.

Long story short.... Left machine running a finishing pass on some vacuum forming molds came back once finished and the spindle was sitting very randomly spinning in a none natrul way. https://youtube.com/shorts/OUIfTT_EAKI

Parts I have changed thus far....

A new pmdx 126 and 107 board have been fitted.

If any one can shed any light onto this i will be greatful as you all know, Its an expesive table if its not cutting.

Thank you in advance

regards Tom