Thread: New User from Italy
Hybrid View
-
15-06-2022 #1
Hello guys,
my name is Giampiero and I would like to introduce my self.
I am going to purchase my first CNC router for my garage (I was thinking about stepcraft...but if you have any other suggestion please feel free to let me know).
I have had this in mind for many years and finally I found a garage to share with some other technician
Professionally I work for an Italian CNC router manufacturer calld Protek as a project/sales manager.
I live Italy, but I frequently travel to UK.
Thank you for letting me in :)
-
17-06-2022 #2
Welcome to the forum Giampiero!
-
17-06-2022 #3
Hi Giampiero welcome to the forum.
If you can give some information regarding your requirements, ie table size and intended use no doubt someone will better advise, a certain member on the forum does produce CNC machines that are highly recommended.
Enjoy the forum
Regards
Mike
-
29-06-2022 #4
I was thinking about:
a worktable size 1000mm x 500mm
worktable size mdf
1kW electrospindle
vacuub blocking system
-
30-06-2022 #5
Hi CNCConnect
sorry i should have been a bit clearer in my last post, to calculate motor loading the weight of the gantry needs to be known, also the drive arrangement ie acme/trapazoidal or ball screws, if you provide this information i am sure Dean will comment regarding suitable motors and power supplies.
Kindest Regards
Mike
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
NEW MEMBER: Hi from Italy
By emapro2001 in forum New Member IntroductionsReplies: 1Last Post: 13-12-2010, 04:42 PM -
NEW MEMBER: Hello from Italy
By simo.borgo in forum New Member IntroductionsReplies: 1Last Post: 10-11-2010, 12:04 AM -
NEW MEMBER: Hi to all, Italy
By ziogessy in forum New Member IntroductionsReplies: 1Last Post: 12-09-2010, 11:22 PM -
NEW MEMBER: Hi from Italy
By massimomb in forum New Member IntroductionsReplies: 2Last Post: 19-07-2009, 12:18 PM -
NEW MEMBER: Hello from Italy
By franc33 in forum New Member IntroductionsReplies: 1Last Post: 29-03-2009, 06:49 PM
Bookmarks