Thread: AXYZ Z7 Mister Connections
-
20-06-2022 #1
I have a AXYZ Z7 and would like to connect a mister to it but I really don't want to pay USD2,500 for theirs. All I need is an air connection on the gantry and I can use any make and model. There is 4mm PTC (push to connect) for the pressure foot. There is a 6mm PTC with nothing in it. Inside, the 6mm line runs to a solenoid that is powered by the PC board. Does anyone know what that 6mm PTC connector is supposed to be used for and how can I power that solenoid?
I already tried Tools Manager/Tool Properties/Auto Mister and Air Assist. Any insight would be most helpful.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
ATC Spindles air connections inquiry
By Noplace in forum Spindles & Drive MotorsReplies: 5Last Post: 08-04-2021, 07:57 AM -
Sieg KX3 probe connections
By halftonner in forum Sieg Milling MachinesReplies: 4Last Post: 03-03-2019, 10:58 AM -
Mister control
By Leadhead in forum Workshop & EquipmentReplies: 2Last Post: 08-11-2018, 09:32 PM -
Fogless Mister Systems
By firetrappe in forum Swarf & Chip ManagementReplies: 21Last Post: 28-01-2018, 08:05 AM -
2 Machines 1 Switch for the output - Connections
By Ian Hart in forum General ElectronicsReplies: 7Last Post: 02-04-2010, 02:33 PM
Bookmarks