. .
  1. #1
    Hi All,

    I am new here and a hobby table top CNC user. I have the FoxAlien CNC-4040-Basic, this comes with a 60w motor. I am looking to upgrade this and add a speed controller, this is their upgrade option https://www.foxalien.com/en-gb/colle...ter-3018-se-v2

    is this worth it or can someone help with guidance for something better or is this as good as I can get for now?

    Thank you

  2. #2
    Welcome to the forum Anthony.
    Somebody in the know will hopefully be along to help you.
    Meantime I'm keeping my tinfoil hat on ;-)

  3. #3
    Well, you are in a funny place with this machine and heading on a potentially slippery slope.? There is no easy way to say this so I'll just say it.!

    The machine is not strong enough for a proper spindle and the spindle you link to is a toy in reality which I wouldn't waste money on. My advice would be to make use of what you have, save the money you would spend on a spindle, and put it into buying a better machine.?

    The slippy slope I refer to is the fact that when you start to upgrade weak machines like these it quickly highlights other weak areas and before you know you are so far into upgrades that you could have bought a much better machine with the money without all the hassle and downtime the upgrades take.

    It's a very common mistake new users make so the best advice is to use the machine without spending any money on it, then cut your losses and buy a better machine.
    -use common sense, if you lack it, there is no software to help that.

    Email: [email protected]

    Web site: www.jazzcnc.co.uk

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 11
    Last Post: 02-10-2020, 09:49 PM
  2. New milling motor Proxxon FBS 240/E upgrade to Kress 1050 FME-1
    By Zynch175 in forum Spindles & Drive Motors
    Replies: 24
    Last Post: 20-02-2016, 09:30 AM
  3. VFD upgrade
    By paulus.v in forum Spindles & Drive Motors
    Replies: 11
    Last Post: 05-11-2014, 11:09 PM
  4. AC Motor upgrade - pulley sizes
    By birchy in forum Linear & Rotary Motion
    Replies: 7
    Last Post: 21-06-2013, 10:49 PM
  5. Upgrade
    By Dopy in forum General Discussion
    Replies: 0
    Last Post: 09-11-2011, 01:57 AM

Tags for this Thread


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts