Thread: Newbie Help required.
-
22-07-2022 #1
Firstly I would like to apologise for my complete lack of technical knowledge. I am a bit useless when it comes to these sorts of things. Ideally I would like to pay someone to come and aort my machine (Southampton) but the companies I have found are charging more than the machine cost in the first place!
I bought a chinese copy of Redsail x700 which is an 80watt machine with 700mm x 500mm bed. This is as a hobby mqchinr and a few small projects, not for production use as such. I bought it 2nd hand and saw the machine working.
I got it back to my work unit and other work has got in the way and not done anything with it for a few months.
Anyway I have tried to set it up last couple of days but run into some problems. Firstly the machine does not move on the Y axis (it physically does move but not with arrow keys on the controller - X axis works fine).
Secondly I have tried to connect it to LightBurn, both automatically and manually and I cannot connect it at all.
Please can anyone help. As i say more than happy to pay for someone to come and give me some pointers and try and help or even do so over facetime etc and I will again pay for your time. Much appreciated.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Help Required!
By Gadge in forum Control Hardware & SystemsReplies: 1Last Post: 15-03-2021, 04:40 PM -
WANTED: Off-cut required.
By Wal in forum Items WantedReplies: 8Last Post: 14-12-2015, 11:09 PM -
Help required with desktop cnc build - cutting out the required plates
By alanb in forum OpenBuilds OX CNC MachineReplies: 0Last Post: 08-07-2014, 03:11 PM -
NEW MEMBER: Hello everyone advice required please.
By Paul-in-Bury in forum New Member IntroductionsReplies: 1Last Post: 26-01-2012, 11:57 PM -
NEW MEMBER: Help required
By Vespa Mad in forum New Member IntroductionsReplies: 1Last Post: 24-06-2009, 02:06 PM
Bookmarks