E stop configure

[Evans]

The whole issue with electronics and computers is so complex that getting definite answers rather than opinions is difficult.
I'm building on a budget so need to be aware of what is peripheral and what are necessary precautions.

Shielded cables and grounding the chassis does seem to be a necessity to prevent problems later.

An emergency stop facility, limit switches and circuit protection also are in the necessary folder.

That said I want to keep it simple so I'm trying to find the compromise between necessity and unnecessary componentry.
Thanks for the responses Evans

[phill05]

The whole issue with electronics and computers is so complex that getting definite answers ( there are thousands if not more making electronic components so you cannot get a definite answer each cnc builder can only give you their advice/opinion) rather than opinions is difficult.
(Ask ten different people the same question and you might get 12 different answers)

I'm building on a budget so need to be aware of what is peripheral and what are necessary precautions.

Shielded cables and grounding the chassis does seem to be a necessity to prevent problems later.

An emergency stop facility, limit switches and circuit protection also are in the necessary folder.

That said I want to keep it simple so I'm trying to find the compromise between necessity and unnecessary componentry.
Thanks for the responses Evans