Endmill failure or wrong feeds and speeds?

[Lee Roberts]

Hi Oli,

Yea when you hit that sweet spot with MDF you will definitely know, if you go with any of the "pro" type from any of the top brands you should be good, the cheap stuff from the likes of B'n'Q etc is no good, though they are doing Medite Trade, particularly in the 18mm, again this doesn't machine as good, I would say to anyone go with Medite Premier if you can get it in, otherwise the likes of Build Base and/or Selco do Norbord / Caberwood and this is good enough, again stay off the Trade line with these too.

Ok cool, I'll try and grab some shots of my edge finish for you and maybe a video.