Milling Machine Advice

[dazp1976]

The new amadeal E3 has my attention.
I got my 25LV from there.

[routercnc]

You can also buy tube notchers such as this
http://https://m.vevor.co.uk/tube-pipe-notcher-c_10115/vevor-pipe-tubing-notcher-pipe-and-tube-notcher-hole-saw-0-60-degree-2-capacity-p_010631772408?gclid=CjwKCAjw7p6aBhBiEiwA83fGuiDMk F8FGedZ12lo0jUXY4xVw11FnOyAY8gogK9e_ufDGr6Yn0zCtho CpYcQAvD_BwE

[Mike W]

A hole notcher would manage one portion of the process but need the capability to make up drop outs, motor/gear box mounting frames (for ebikes, pinion gearboxes) and anything else I might need for a custom bike. It is a cheap solution though it would need to be able to do offset and 2-axis notching.

[Mike W]

I did miss the Amadeal options off my list and had looked at the E3. The question is are they readily converted or is it easier to go straight to CNC in which case what are the options?