Gantry plates for avid drive

[winzhangout]

Ok i test answer as good as i can here :-)

Ok i stick to that solution as the picture but as X axis i have in mind that if i use 1 standing 90X180 and 1 90X90 mounted together at the buttom, i add a picture of how the X axis looks from side, on the picture its only 3X90 just because i dont have order any 90X180 yet. The 180mm can be laying down and the X90 on top on if also, dont think it matters how it be mounted. the extra 90x90 is for carrier of cables and think it be more stable if the X axis is wider for the hiwin blocks that can be with more distance between them.

Maybe if i get an 20mm aluminium plate or something thats little bigger then the 180mm so i can screw the linear blocks first from top of it then also make holes for mount it below the X axis U10?

But next thing is X2 20mm linear on top also a bad idea, i think it will fit or is 1 linear better to go. Or else what size to get, i want it to be a stable machine. Should i go for 25 or 30 or 35 if you think only 1 linear on each top of Y and A axis is enough to get it stable?

Tuli https://www.tuli-shop.com/tbi-motion...ar-guide-block told me that this TBI Motion and choose Z1 instead of Z0 they also sell itts much better then the HR Economy model thats seems equal with hiwins cheepest model. True or not?

Video of machine before broken BOB https://www.youtube.com/watch?v=VTGPy6uqdxc