. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Hi
    I have a new (old ) V4 microrouter and I'm trying to configure linuxcnc to run it. But I don't know the leadscrew pitch, and I can't find anything on the Denford forum. (And I've asked there but had no replies). Does anyone here know?

  2. #2
    I don't but I'm sure someone will come along who dose...

    Can you not measure it to get an idea ?

    Just found this from Andy Con on another thread, he mentions 3mm here for the pitch, I've sent him an email asking him to come and confirm for us :), for now you could try 3mm then :)

    Quote Originally Posted by andy_con View Post
    with the help of a friend the v4 board is now connected and motor is spinning
    motors are 200 steps / revDirect drive, no gearing.Lea
    dscrew is 3mm pitch (1 rotation moves 3mm) waiting to get exact pitch from denford forum
    Microstepping is 1/10 (stepper drivers are set to 10)
    so:No. of steps per mm is = 200 * 10 * (1/3) = 667
    Any ideas @andy_con ?
    .Me

  3. #3
    Can't remember sorry, not got the microrouter anymore.

    Temporary fix some digital calipers to the x and use them to calibrate movement.

  4. The Following User Says Thank You to andy_con For This Useful Post:


  5. #4
    Quote Originally Posted by andy_con View Post
    Can't remember sorry, not got the microrouter anymore.

    Temporary fix some digital calipers to the x and use them to calibrate movement.

    Yes what I'm doing now is cutting a 15cm square and then using digital calipers to measure the x and y (luckily they are the same) and using this to calculate a value. I'm getting pretty close, I think

  6. #5
    Pretty sure from memory I had to do this when I was setting the microrouter up as the info I found didn't seem to match

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Denford microrouter extraction
    By Edendale in forum General Discussion
    Replies: 6
    Last Post: 11-05-2021, 08:44 PM
  2. Denford Microrouter V4
    By andy_con in forum Denford Routers
    Replies: 62
    Last Post: 14-06-2016, 05:35 PM
  3. Denford MicroRouter Compact, what to do next?
    By paul_m in forum Denford Routers
    Replies: 2
    Last Post: 08-01-2015, 09:51 AM
  4. Replies: 12
    Last Post: 10-04-2013, 09:11 AM
  5. Denford CNC MicroRouter
    By mekanik in forum Milling Machines, Builds & Conversions
    Replies: 12
    Last Post: 27-08-2012, 06:57 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •