Austin Allen Gnat 250 User Manual

[kwc_usa]

Hi my machine is also an air gnat 250. So if it would be possible for a scan, i would be most grateful. Thanks Roger.

I've attached a pdf of the instruction manual I have. I also have a set of drawings but they are full size and I don't have a way to scan. If you need a particular drawing I may be able to scan it into several pages and you can reassemble the pages to full size after printing.

My machine is slightly different from the instruction manual. Mine has an additional injection cylinder that can be piggy-backed onto the original cylinder to increase the injection pressure capacity. I don't think the manual shows this option. I also have the core unscrewing option but I've never tried it. It requires a plug in relay that I don't have. Right now I don't have a use for that option anyway. Mine does not have the sentry alarm system hooked up to alert temp and operation faults. The previous owner made some modifications and disconnected that part of the system. I'll try and find a few photos and upload them later. Hope the manual helps. I had to scan at a slightly reduced resolution to keep the file size down.