Quote Originally Posted by JohnHaine View Post
I have a lathe and mill running with two mach3 profiles on the same Win10 PC, both driven by UC100 controllers over usb. Try cnc4you.co.uk for cncdrive stuff in the UK.
They only carry the UC100 and UC400eth.

I went direct to cncdrive. Cost me a bit to import but... If you catch it when there's an offer on, and you want to get a fair few bits n bobs. It's worth the extra to get what you want.
If I did it again I'd get the UC300/UB1 from cncroom and then some cheap isolation units frim ChinChin for ports 4&5.

Play with all the software types first, see what you like, go from there.