Threaded View
-
30-11-2022 #1
Everyone has a bad day now and then, so when you do just stop by here and see it there is an update and watch this woodbutcher try to build a CNC router for some funny laughs. :haha:
Not going to pretend I'm a carpenter but going to give it a go just the same. Have a few basic tools; nothing fancy.
Hopefully I will get a 2'x4' cutting area, would like to build it enclosed for dust containment.
Started out scoring some 9 ply 3/4 inch birch plywood from our local home center and cut into pieces to build the bed.
Building the box.
Using 2×6’s laminated 3 thick for the main supports, staggered the joints and glued and screwed them together.
Putting the base frame together with wheels for now just for convenience.
Slid the base into place and fastened it.
This is going to take a while…. wow
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
My first Wooden Toys
By davidcha in forum Woodworking Project ShowcaseReplies: 0Last Post: 21-02-2019, 02:38 AM -
CNC Router Build I am a new member, Gordon a retired farmer 70 yrs young.
By Linkbus1 in forum Gantry/Router Machines & BuildingReplies: 5Last Post: 15-08-2018, 01:24 PM -
Wooden CNC
By Andyshomecrafts in forum Gantry/Router Machines & BuildingReplies: 33Last Post: 10-08-2015, 11:54 PM -
Wooden sunglasses
By jimkrum in forum Woodworking Project ShowcaseReplies: 4Last Post: 23-08-2014, 07:10 AM -
wooden joints
By luke11cnc in forum Woodwork DiscussionReplies: 7Last Post: 18-10-2012, 11:59 PM
Bookmarks