-
23-12-2022 #1
Timed the drop of the clamp, over a minute & also over an hour, etc on both machines (clamp dropped from 100.6 to 96.5 in period of 1 minute, mold fully closed in 46.5 minutes). 1.Replaced brake valve (issue still the same). 2.Checked oil level. Replaced oil and oil filter (issue still the same).3. Re- adjusted pressure on brake valve from 20 bar to 25 bar (no change, issue still the same). Any suggestions what could possibly be wrong?
-
27-12-2022 #2
Hi Elvis and welcome to the forum,
Sorry I can be of any help on this one, hopefully some others with more experience can give you some ideas or pointers....Me
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Very mysterious dropping steps on one Y axis motor...I'm starting to lose it!!
By Hatchett Job in forum General DiscussionReplies: 25Last Post: 01-04-2022, 08:13 AM -
Herbert 2D 6 turret lathe with pegboard control and hydraulics
By JaviPK7 in forum Lathes, Lathe Rebuilding & ConversionsReplies: 3Last Post: 07-01-2022, 11:58 AM -
Triac VMC Servo // Z-Axis Dropping on power off
By danielbriggs in forum Machine DiscussionReplies: 6Last Post: 09-07-2018, 10:35 PM -
Why does it happen when you are under pressure ?
By cropwell in forum Milling Machines, Builds & ConversionsReplies: 8Last Post: 23-12-2013, 11:12 PM -
Mold Making?
By Shinobiwan in forum Moulding MachinesReplies: 10Last Post: 27-02-2013, 02:15 AM
Bookmarks