. .
  1. #1
    Timed the drop of the clamp, over a minute & also over an hour, etc on both machines (clamp dropped from 100.6 to 96.5 in period of 1 minute, mold fully closed in 46.5 minutes). 1.Replaced brake valve (issue still the same). 2.Checked oil level. Replaced oil and oil filter (issue still the same).3. Re- adjusted pressure on brake valve from 20 bar to 25 bar (no change, issue still the same). Any suggestions what could possibly be wrong?

  2. #2
    Hi Elvis and welcome to the forum,

    Sorry I can be of any help on this one, hopefully some others with more experience can give you some ideas or pointers...

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 25
    Last Post: 01-04-2022, 08:13 AM
  2. Herbert 2D 6 turret lathe with pegboard control and hydraulics
    By JaviPK7 in forum Lathes, Lathe Rebuilding & Conversions
    Replies: 3
    Last Post: 07-01-2022, 11:58 AM
  3. Triac VMC Servo // Z-Axis Dropping on power off
    By danielbriggs in forum Machine Discussion
    Replies: 6
    Last Post: 09-07-2018, 10:35 PM
  4. Why does it happen when you are under pressure ?
    By cropwell in forum Milling Machines, Builds & Conversions
    Replies: 8
    Last Post: 23-12-2013, 11:12 PM
  5. Mold Making?
    By Shinobiwan in forum Moulding Machines
    Replies: 10
    Last Post: 27-02-2013, 02:15 AM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts