. .
  1. #1
    Timed the drop of the clamp, over a minute & also over an hour, etc on both machines (clamp dropped from 100.6 to 96.5 in period of 1 minute, mold fully closed in 46.5 minutes). 1.Replaced brake valve (issue still the same). 2.Checked oil level. Replaced oil and oil filter (issue still the same).3. Re- adjusted pressure on brake valve from 20 bar to 25 bar (no change, issue still the same). Any suggestions what could possibly be wrong?

  2. Hi Elvis and welcome to the forum,

    Sorry I can be of any help on this one, hopefully some others with more experience can give you some ideas or pointers...

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 25
    Last Post: 01-04-2022, 08:13 AM
  2. Herbert 2D 6 turret lathe with pegboard control and hydraulics
    By JaviPK7 in forum Lathes, Lathe Rebuilding & Conversions
    Replies: 3
    Last Post: 07-01-2022, 11:58 AM
  3. Triac VMC Servo // Z-Axis Dropping on power off
    By danielbriggs in forum Machine Discussion
    Replies: 6
    Last Post: 09-07-2018, 10:35 PM
  4. Why does it happen when you are under pressure ?
    By cropwell in forum Milling Machines, Builds & Conversions
    Replies: 8
    Last Post: 23-12-2013, 11:12 PM
  5. Mold Making?
    By Shinobiwan in forum Moulding Machines
    Replies: 10
    Last Post: 27-02-2013, 02:15 AM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts