. .
Page 1 of 2 12 LastLast
  1. #1
    I never got round to introducing myself when I joined this site many months ago. I just lurked in the background, reading as much as possible and working out what I would need to build a router with a working area of 600mm x 500mm.

    So now I'll say Hi:wave:

    I have always been interested in computers and interfacing so a cnc router seemed like the ideal project to have a go at.

    I looked on cnczone at all the kits and plans but nothing really caught my eye. I decided to build my own design after ordering a ball screw and linear rail set from China via Ebay.

    I now had something to base a design around and I came up with this.

    The base was to be made from 50 x 100 box section with 40 x 40 intermediate supports.

    The gantry was to be made from 50 x 50 box section.

    I had all these bits laying around as left overs, so I got welding.

    A bit of drilling, tapping and painting later and the frame was done.

    I had wanted to make the z-axis out of aluminium but I dont really have equipment necessary to machine aluminium to any high degree of accuracy. I am builder by trade so my toolkit is jigsaws, grinders, pistol drills etc. I had to choose between making it out of MDF, making it out of steel or getting someone with the right equipment to make it.

    A good friend whos owns a cnc factory owed me a favour, so I drew up some dxf files of what I wanted and waited a couple of months until he got round to making them. It was well worth the wait.

    They are made from aircraft grade aluminium and have been anodised a lovely black colour to avoid corrosion.

    Now I could get cracking again.

  2. The Following User Says Thank You to pavlo For This Useful Post:

  3. #2
    Next step involved spending some more money. So I spoke to Gary at Zapp and ordered 3 nema 23, 3nm steppers and drivers plus power supplies and breakout board. An old pc case was scrounged and I put it together like this.

    Looking at the price of motor mounts scared me so I got some more scrap and made these.

    Which, when painted looked quite good.

    I needed a mount for the Kress spindle I bought so I got my 20 B+Q router out and set to work on more scrap. When it was all put together it looked like this.

    A gift of a decent spec pc with a parallel port meant that I could start to get it working. I installed mach3, plugged it all in and told the program it was 400 steps per mm on all axis. I expected to be doing a log of tinkering and tuning to get it to run well so I was very pleased when it all ran flawlessly. All axis jogged at full speed without any problems at all and the acceleration I could get amazed me, I ended up turning it down a bit because the kitchen table it was set up on for testing was shaking too much (yes my wife is a saint).

    I have still got to connect limit switches and and e stop button but I thought I would give it a go.



    So thats it. It took about 4 months of grabbing the odd hour here or there to get it done but now I have a good, strong working router for about 1000.

    Now all I need to do is find something to do with it.
    Last edited by pavlo; 07-01-2010 at 02:20 AM. Reason: trying to get youtube to work

  4. #3
    wow! looks like a real good machine in only 4 months:clap:could you tell me how easy it was getting slides etc from china, how long did it take?how much did it cost plus delivery?what company did you use?
    sorry for all the questions but i am just snooping around internet for best ideas and prices to build my own router.
    hope my build goes as smoothly as yours

  5. #4
    Hi Tom.

    Getting the bits from China was easy. The price was 412.08 including shipping. I expected to get charged VAT and import duty but I got away with it. I'm sure the quality of the ballscrews is not as good as you would get from some of the sponsors of this site but for my first machine, it made sense to me. The drive couplings didn't last long but to be fair, they were rated for 2Nm and I was working them hard on 3Nm motors. I have replaced them for now with reinforced hose and jubilee clips.

    The bits from China took about 3 weeks to arrive but when they were delivered, the small pair of linear rails were missing. I emailed the guy and he sent them out straight away without any argument.

    I dont know the policy for posting the details of non-sponsors so I will PM you the guys details.

    My build costs were

    Rails etc 412.08
    Motors and drivers 400.51
    Spindle 152.50
    4 core screened cable for motors 15.00
    and about 50 for machine screws and electrical bits and bobs.
    Everything else was given freely or was scrap.

    I hope your build goes well


  6. #5
    Looking good pavlo!

    I'm using the TBR type supported rail for the new machine i'm currently working on as well, i'm hoping to start my build log VERY soon.

    How much did the lovely anodised black cost to have done, somthing i picked up on from your build was aluminium and corrosion, this is somthing i didnt really think about.


  7. #6
    Hi Lee

    I was fortunate enough the get the black anodised bits made for free.

    I dont know much about aluminium but I do know that some grades will corrode very easily, especialy if steel screws are used.

  8. #7
    Hi Pavlo,

    Ok no problem mate, i hope i wont have any problems but i guess i could look into this and let you know. Maybe some undercoat and a top coat maybe in order!

    Great !

  9. Indoors in the dry aluminium needs no protection as the film of aluminium oxide that forms with oxygen is sefl-protecting. However this does give a dull finish. Anodising provides a nice surface finish and looks better but isnt necessary.

    See http://www.keytometals.com/Article14.htm for more info.

  10. #9
    Pav your images have stoped working mate?

  11. #10
    Thanks Lee

    sorted now I hope.

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Advice on Mammoth CNC Router Build - Steel Framed - 2440mm x 1220mm cutting area!
    By Wejjmeister in forum Gantry/Router Machines & Building
    Replies: 87
    Last Post: 03-01-2016, 12:45 AM
  2. A Sturdy Steel Framed Machine Design
    By Boyan Silyavski in forum Machine Frames & Beds
    Replies: 0
    Last Post: 06-11-2013, 05:58 PM
  3. BUILD LOG: Steel Framed CNC router
    By Joe in forum DIY Router Build Logs
    Replies: 14
    Last Post: 23-06-2013, 10:45 PM
  4. BUILD LOG: Formed steel cnc router
    By sbams in forum DIY Router Build Logs
    Replies: 4
    Last Post: 07-03-2013, 02:00 AM
  5. BUILD LOG: Steel Framed Router
    By GTJim in forum DIY Router Build Logs
    Replies: 52
    Last Post: 14-09-2011, 06:51 PM

Tags for this Thread


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts