Woodworking Router SBD0905

[scratchbuilt_designs]

And here is the finished router.

Added an Acetal fixture plate with integrated vaccum holding feature.
And there is a magnetic laser dock on the Z-axis.

I decided against a chip collection, fixed to the Z-axis, because I only have a regular Ø36mm hose shop vac, which would be instantly clogged.
So I rather added a dust filter on top of the enclosure, to keep the air reasonably clean and chips are removed manuall with the vac - after the job.

I had to redo the corner though, making the benchtop 100mm deeper, in order to widen the enclosure a little bit.
That created some intermediate shop chaos, but overall, it turned out quite well...