. .
Page 1 of 2 12 LastLast
  1. #1
    Hi all,

    As I'm busy with work and no longer have the time or space to run this machine, i'm looking to sell. Would alo consider selling parts seperate (control panel as a single unit), if there's more interest. Details as follows:

    General Info:
    Hours of use: Few hundered hours of hobby use (many of which were idle)
    Materials cut: Aluminium, brass, various woods, foams, plastics and more.
    Cutting area: ~700 x 400mm with Z axis of around 90mm (from spoil board (18mm thick) to spindle). There is also a 100mm overhang for taller objects at the front, so total ~800mm X axis.

    Machine construction:
    Components:
    - HIWIN 20mm rails on all axis (1000, 600, 300mm)
    - 1610 dual ball screws on X axis (1050mm long), 1605 single ball screws on Y/Z (650, 250mm)
    - All ball screws are belt driven

    Materials:
    - 4mm thick steel box section for the frame/gantry
    - 10mm steel gantry side plates
    - CNC machined aluminium Z axis and motor mounts
    - West System epoxy levelled rail base on X axis.

    Electrics:
    - 2.2kW Water cooled spindle + Huanyang VFD
    - AM882 digital drives on all axis
    - CSMIO/IP-M motion controller
    - PSU for drives + axillary PSU for others
    - 8.7Nm NEMA 34 on X axis and 3.1Nm NEMA 23's on Y/Z (all CNC4YOU)
    - Shielded cables used throughout

    Additional:
    - Mach3 license and setup files to suit this machine (can consider selling laptop too)
    - Manual valve controlled air blast setup for metal machining
    - 25L coolant system setup for spindle
    - Proximity sensors on each end of all axis for homing and limits
    - Various E-stops on the machine/control box

    Can also sell
    - Various size aluminium plates
    - Various tools/collets for the machine
    - Workshop tools (Drill press, bench grinder/sander, compressor, vibratory tumbler, ultrasonic cleaner, etc)

    Photos:
    Machine:
    Click image for larger version. 

Name:	20170727_155916.jpg 
Views:	705 
Size:	151.2 KB 
ID:	31631Click image for larger version. 

Name:	20170727_155930.jpg 
Views:	624 
Size:	184.4 KB 
ID:	31632Click image for larger version. 

Name:	20170727_160009.jpg 
Views:	631 
Size:	208.2 KB 
ID:	31633Click image for larger version. 

Name:	20170727_160024.jpg 
Views:	590 
Size:	168.3 KB 
ID:	31634Click image for larger version. 

Name:	20170727_160214.jpg 
Views:	608 
Size:	172.1 KB 
ID:	31635Click image for larger version. 

Name:	20170727_160225.jpg 
Views:	592 
Size:	295.4 KB 
ID:	31636Click image for larger version. 

Name:	20170727_194932.jpg 
Views:	577 
Size:	93.5 KB 
ID:	31637


    Some machined parts:
    Click image for larger version. 

Name:	20170326_142912.jpg 
Views:	558 
Size:	208.0 KB 
ID:	31639Click image for larger version. 

Name:	20170315_205044.jpg 
Views:	603 
Size:	168.9 KB 
ID:	31638Click image for larger version. 

Name:	coin.jpg 
Views:	602 
Size:	268.6 KB 
ID:	31640Click image for larger version. 

Name:	IMG_0309.jpg 
Views:	575 
Size:	310.1 KB 
ID:	31642Click image for larger version. 

Name:	Top.jpg 
Views:	560 
Size:	243.9 KB 
ID:	31641Click image for larger version. 

Name:	rt.jpg 
Views:	560 
Size:	98.8 KB 
ID:	31643


    Located in North East for collection, if anyones interested. Thanks
    Last edited by raj221; 17-03-2023 at 10:33 AM.

  2. #2
    Hi,
    How much are you wanting?

  3. #3
    Quote Originally Posted by Wylie View Post
    Hi,
    How much are you wanting?
    Hi, trying to send you a private message but doesnt seem to be working. Will see if I can get it sorted.

  4. #4
    Quote Originally Posted by Wylie View Post
    Hi,
    How much are you wanting?
    Looks like it's your settings.
    Could you please check and send me a private message when able. Thanks.

  5. #5
    Hi also interested in price thanks Sam

  6. #6
    Hi, I’m also interested in the price, thank you.

  7. #7
    Quote Originally Posted by johnpaulcarter View Post
    Hi, I’m also interested in the price, thank you.
    Hi John, please could you private message me to discuss. Thanks

  8. #8
    This is still available.
    Looking for around £3,500 for the CNC, collection only — open to offers and would consider selling parts seperatly too (full electrics, frame/gantry, etc).

  9. #9
    Edit: Managed to sort storage for this, so availability is now TBC.
    Last edited by raj221; 17-03-2023 at 10:34 AM.

  10. #10
    Quote Originally Posted by raj221 View Post
    Hi all,
    This is now available as could really do with the extra space.
    Cost me quite a bit more for the components alone, so think it's a fair price. Thanks
    Bargain price. Hope you get a sale sorted soon.
    Last edited by AndyUK; 05-09-2023 at 07:21 AM.

  11. The Following User Says Thank You to AndyUK For This Useful Post:


Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. BUILD LOG: AVOR – a steel-framed medium-size router
    By Neale in forum DIY Router Build Logs
    Replies: 23
    Last Post: 10-06-2019, 10:15 PM
  2. Large Format Steel Framed Router
    By nathandavies in forum Gantry/Router Machines & Building
    Replies: 2
    Last Post: 07-02-2016, 02:51 PM
  3. BUILD LOG: Steel Framed CNC router
    By Joe in forum DIY Router Build Logs
    Replies: 14
    Last Post: 23-06-2013, 10:45 PM
  4. BUILD LOG: Steel Framed Router
    By GTJim in forum DIY Router Build Logs
    Replies: 52
    Last Post: 14-09-2011, 06:51 PM
  5. BUILD LOG: My steel framed router
    By pavlo in forum DIY Router Build Logs
    Replies: 17
    Last Post: 06-03-2011, 10:08 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •