-
15-01-2023 #1
Hi all,
As I'm busy with work and no longer have the time or space to run this machine, i'm looking to sell. Would alo consider selling parts seperate (control panel as a single unit), if there's more interest. Details as follows:
General Info:
Hours of use: Few hundered hours of hobby use (many of which were idle)
Materials cut: Aluminium, brass, various woods, foams, plastics and more.
Cutting area: ~700 x 400mm with Z axis of around 90mm (from spoil board (18mm thick) to spindle). There is also a 100mm overhang for taller objects at the front, so total ~800mm X axis.
Machine construction:
Components:
- HIWIN 20mm rails on all axis (1000, 600, 300mm)
- 1610 dual ball screws on X axis (1050mm long), 1605 single ball screws on Y/Z (650, 250mm)
- All ball screws are belt driven
Materials:
- 4mm thick steel box section for the frame/gantry
- 10mm steel gantry side plates
- CNC machined aluminium Z axis and motor mounts
- West System epoxy levelled rail base on X axis.
Electrics:
- 2.2kW Water cooled spindle + Huanyang VFD
- AM882 digital drives on all axis
- CSMIO/IP-M motion controller
- PSU for drives + axillary PSU for others
- 8.7Nm NEMA 34 on X axis and 3.1Nm NEMA 23's on Y/Z (all CNC4YOU)
- Shielded cables used throughout
Additional:
- Mach3 license and setup files to suit this machine (can consider selling laptop too)
- Manual valve controlled air blast setup for metal machining
- 25L coolant system setup for spindle
- Proximity sensors on each end of all axis for homing and limits
- Various E-stops on the machine/control box
Can also sell
- Various size aluminium plates
- Various tools/collets for the machine
- Workshop tools (Drill press, bench grinder/sander, compressor, vibratory tumbler, ultrasonic cleaner, etc)
Photos:
Machine:
Some machined parts:
Located in North East for collection, if anyones interested. ThanksLast edited by raj221; 17-03-2023 at 10:33 AM.
-
31-01-2023 #2
Hi,
How much are you wanting?
-
02-02-2023 #3
-
03-02-2023 #4
-
04-02-2023 #5
Hi also interested in price thanks Sam
-
04-02-2023 #6
Hi, I’m also interested in the price, thank you.
-
05-02-2023 #7
-
12-02-2023 #8
This is still available.
Looking for around £3,500 for the CNC, collection only — open to offers and would consider selling parts seperatly too (full electrics, frame/gantry, etc).
-
06-03-2023 #9
Edit: Managed to sort storage for this, so availability is now TBC.
Last edited by raj221; 17-03-2023 at 10:34 AM.
-
06-03-2023 #10
Last edited by AndyUK; 05-09-2023 at 07:21 AM.
-
The Following User Says Thank You to AndyUK For This Useful Post:
Thread Information
Users Browsing this Thread
There are currently 9 users browsing this thread. (0 members and 9 guests)
Similar Threads
-
BUILD LOG: AVOR – a steel-framed medium-size router
By Neale in forum DIY Router Build LogsReplies: 23Last Post: 10-06-2019, 10:15 PM -
Large Format Steel Framed Router
By nathandavies in forum Gantry/Router Machines & BuildingReplies: 2Last Post: 07-02-2016, 02:51 PM -
BUILD LOG: Steel Framed CNC router
By Joe in forum DIY Router Build LogsReplies: 14Last Post: 23-06-2013, 10:45 PM -
BUILD LOG: Steel Framed Router
By GTJim in forum DIY Router Build LogsReplies: 52Last Post: 14-09-2011, 06:51 PM -
BUILD LOG: My steel framed router
By pavlo in forum DIY Router Build LogsReplies: 17Last Post: 06-03-2011, 10:08 PM
Bookmarks