I actually use the free editions of both F360 and Solid Edge. The current free version of F360 is somewhat limited compared to its original version but is still pretty good. The CAD side of it is more-or-less the same anyway but its real benefit is the CAM toolpath generation module and that has been more restricted. However, apart from 4- and 5-axis CAM, most of the limitations can be overcome. On the whole, I think Autodesk have tried to make it difficult for commercial users without completely ruining it for hobby users. But there's a bit of an overlap between these sets of users and not everyone likes having their toys taken away! I didn't, but I use the workarounds and if something equally powerful suddenly became available at the same price (free...) then I expect quite a few people would welcome it.

I have largely moved to SE for CAD, though, as I find it a bit more difficult to use (at first) but it seems more powerful when it comes to larger and more intricate models. You can then export solid models in the standard .stp format, import into F360, and use its CAM for toolpath generation. I tend to stick to F360 for 3D modelling of single objects, though, and SE for complex assemblies.

Horses for courses, and everyone has their own preferences, not least open-source versus free-but-commercial.