Thread: Hi hi
-
13-02-2023 #1
New to cnc and just got a connect 121 that I want to convert to mach 4 and use for threading
what are the best motion control and stepper drive to get to do this please
cheers Tony
cialis super active prixLast edited by drchabbit; 14-02-2023 at 07:59 AM.
-
15-02-2023 #2
I don't know about "best" but my Super 7 conversion uses UC100 motion controller with USB connection to mini PC running Win10. A fairly generic BoB and 2M542 (or better DM542) drivers running on 40v. Unless you are going to fit new steppers or stepper/servos this would be fine I think. I can't recall if Mach4 uses just a spindle index pulse for threading or can take an encoder pulse too - I suspect the UC100 may not handle an encoder. But Mach3 threads OK with just an index.
Btw the Conect 121 is based on the Myford ML10.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks