Hybrid View
-
01-03-2023 #1
nema 23's 10 off 8 wire 6.35mm shaft new £9 each
note some have been slottewd to fit 60mm base nema 24 size well three have
nema 23's the 56mm ones again 8 wire, 2 of these have been slotted to 60mm 6.35mm shaft 56 mm long 8 wire new
i bought them not realising you could buy 2 or 4 phase 60mm nema 24's - hmmm
for sale 7 5 phase 10 wire 6mm shafted berger lahr motors 60mm foot £25 each
they are well nice
one 3 axis driver set up for 5 phase motors above circa 1998 £50
as above but 4 axis £50
seimens 24v sngle post psu nice one circa 1998 £25
3 little drivers £30 new toshiba 6600 4.5 amp 3 inch high
set of three new plum couplings 6 to 6.35 x3 £20
as above but 14mm diameter £20
steve
thanks
will swapsies stuff
also have a circa 2014 usb ddrmv1 break out board £45new
and a novusun network mach3 breakout board £90
Thread Information
Users Browsing this Thread
There are currently 2 users browsing this thread. (0 members and 2 guests)
Similar Threads
-
WANTED: three nema 23's with 8 wires - 41mm or 57mm dont care
By nobby in forum Items WantedReplies: 2Last Post: 30-01-2023, 10:01 PM -
BUILD LOG: Here We Go Again - But Bigger, Much Bigger....
By CNCKitMan in forum DIY Router Build LogsReplies: 7Last Post: 21-05-2018, 01:36 PM -
FOR SALE: 3 nema 23 sanyo denki motors 56mm 3a - 3 4.5a tb6600 36v drives - one 36v psu £125
By nobby in forum Items For SaleReplies: 0Last Post: 27-06-2014, 10:24 PM -
WANTED: Supported rail. The bigger the better
By r0bsk1 in forum Items WantedReplies: 0Last Post: 08-07-2013, 07:50 PM -
Nema 34 Stepper Drives,
By drumsticksplinter in forum Gantry/Router Machines & BuildingReplies: 7Last Post: 03-04-2013, 04:20 PM
Bookmarks