Thread: I am questioning my sanity....
Threaded View
-
29-12-2009 #1
Well the last two days I have spent a lot of time generating scrap :cry:
Drills breaking off in holes, holes bored too big because I forgot the clicks on the boring head were radius not diameter ( I'd remembered right up to the last but one cut :sad: ) and finally when I get everything else right, I went to tap out a 3mm hole and the tap snapped off in the hole... thought it felt tight, wasn't till after it snapped I looked closely... the plug tap was a 1/8BSW not an M3... this was a brand new 3tap set from RDG still in its plastic wrapping... never imagined one of them would be wrong.
Argggggggghhhhh
Thread Information
Users Browsing this Thread
There are currently 2 users browsing this thread. (0 members and 2 guests)
Similar Threads
-
Save my sanity - 1050 grade aluminium
By Isaac in forum Metal Finishing TechniquesReplies: 12Last Post: 03-06-2014, 01:45 AM -
screening / glitchy operation - sanity check
By dsc in forum General ElectronicsReplies: 21Last Post: 01-12-2013, 11:35 PM -
maximum deflection - sanity check
By dsc in forum Gantry/Router Machines & BuildingReplies: 6Last Post: 11-02-2013, 09:33 AM -
sanity check - constant running, loads and more
By dsc in forum Stepper & Servo MotorsReplies: 4Last Post: 26-11-2012, 12:26 PM -
Toroidal transformer voltages - sanity check needed!
By m_c in forum General ElectronicsReplies: 16Last Post: 03-10-2011, 08:34 PM
Bookmarks