. .
  1. #1
    Hi for everyone
    after big boom on the first VFD.
    I'm trying to marry the New vfd with same characteristics ( 220 v / 380v 2.2kw CHINT) and the two spindles with no support no information no data sheet....
    according to mr google... It's :
    2.2kw
    380v
    24000rpm
    400Hz
    2 pole
    and I have set the Motor Stator Impedance to 6 homs.
    Everything went well
    But i noticed two things
    1) the display shows negative values
    2)strange sounds like an old radio
    PS I am a mechanic so electricity is a bit difficult for me.
    it is a machine for smoothing the edges of wooden plates.
    it's my brother's machine...i appreciate your help and sorry for my bad English



    Envoyé de mon A1601 en utilisant Tapatalk

  2. When a VFD displays negative values, it often indicates a reverse rotation direction. Reversing the direction is usually a simple adjustment in the VFD's settings.
    Now, let's address the strange old radio-like sounds. These peculiar noises can be attributed to electrical noise interference. When a VFD operates, it generates harmonics and electromagnetic interference, which can manifest as audible sounds resembling static from an old radio. Some VFDs have built-in motor filters that can be enabled to reduce noise. Check if your CHINT VFD has this feature and activate it if available.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. New VFD will only display frequency, not RPM
    By Smiffy in forum Generic Chinese Spindles
    Replies: 8
    Last Post: 01-04-2022, 02:50 PM
  2. Replies: 5
    Last Post: 04-04-2020, 12:50 AM
  3. High frequency vfd 1500hz
    By assadi in forum Spindles & Drive Motors
    Replies: 0
    Last Post: 28-08-2018, 04:12 PM
  4. Configuring Altivar 12 frequency regulator for PID control
    By vesilp in forum Spindles & Drive Motors
    Replies: 4
    Last Post: 28-01-2017, 04:26 PM
  5. Looking for sound advice
    By PixelsnPrint in forum Gantry/Router Machines & Building
    Replies: 13
    Last Post: 02-04-2014, 11:03 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •