Threaded View
-
30-07-2023 #2
HI friend.I know very little about this brand
In my limited experience though, If the machine doesn't work anymore. It is recommended to first rule out whether there is a fault with the cable, such as disconnection, loose thread, etc.
Then analyze it against the manual and fault codes.
Encoder failure is relatively common
Driver failures are more concentrated on the PCB circuit board. If there is a problem with the circuit board, it may be more difficult to repair. Usually this requires specialized technical
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
FOR SALE: Dc servo motors, drives and more...
By jonnydeen in forum Items For SaleReplies: 3Last Post: 29-03-2023, 09:05 PM -
AC servo motor bearing, repair myself or not?
By Boyan Silyavski in forum Stepper & Servo MotorsReplies: 6Last Post: 29-10-2020, 11:00 AM -
CNC mobile / on-site servicing & repair engineer needed
By Jimmer303 in forum Opportunities Available & SoughtReplies: 0Last Post: 20-05-2018, 08:26 PM -
CNCdrive.com Cheap Servo drives
By BillTodd in forum Marketplace DiscussionReplies: 2Last Post: 13-06-2017, 11:38 AM -
Servo drives and RCDs
By m_c in forum Motor Drivers & ControllersReplies: 0Last Post: 29-06-2013, 12:12 AM
Bookmarks