Custom Made Bits (Wood + Bone Carving.

[Archy]

Thanks Andrew.
I will have a look, I think the bits will need to match or very closely, the differing string thicknesses/sizes, unique to guitars and stringed instruments.

[the great waldo]

Thanks Andrew.
I will have a look, I think the bits will need to match or very closely, the differing string thicknesses/sizes, unique to guitars and stringed instruments.

Hi Archie
I've been a guitar maker / repairer for 50 years (just retired so I can finally get some time to do some making LOL) If you can specify what you want to cut I can maybe point you in the right direction.
Cheers

Andrew

[the great waldo]

Thanks Andrew.
I will have a look, I think the bits will need to match or very closely, the differing string thicknesses/sizes, unique to guitars and stringed instruments.

Hi Archy
If your'e looking for router bits to cut nut slots I think your'e going to luck out on that one unless of course you use engraving bits and there are plenty of those on the Sorotec site and many other sites. Using engraving bits will leave you with a v groove which you'll have to finish off with a nut file to round the bottom out.
Cheers
Andrew