Thread: Axyz millennium
Threaded View
-
20-09-2023 #4
This thread may be of some help https://www.cnczone.com/forums/comme...are-forum.html .You shouldn't need Mach 3 if the machine is able to move and I believe you are describing a homing routine.The computer that you seem to have got with the machine will have some kind of software to send the code to the controller,any idea what it is?
Unless you already have it,there isn't a need for Aspire unless you have plans to cut 3D most of the time.Vcarve will work with 3D .stl files and it costs less to upgrade Vcarve to Aspire than you might think.
Be very cautious about using the machine until you have a good idea about such things as the reference height used for the last job.It may be unneccessary to make the point,but it might be sensible to run with no collet and no tool until you are confident that no harm will result.
Thread Information
Users Browsing this Thread
There are currently 11 users browsing this thread. (0 members and 11 guests)
Similar Threads
-
AXYZ new software ??
By cncbeginner in forum AXYZ RoutersReplies: 13Last Post: 28-11-2023, 11:26 AM -
In Need of AXYZ DNC exe pls
By Arpad in forum Machine Control SoftwareReplies: 1Last Post: 27-11-2023, 05:14 AM -
AXYZ 3000 Router - AXYZ-USB-1A - Drivers
By soap47 in forum AXYZ RoutersReplies: 12Last Post: 12-01-2023, 12:38 PM -
Used Axyz 6010 ATC for sale
By jimmy zenon in forum AXYZ RoutersReplies: 0Last Post: 17-05-2020, 06:26 PM -
AXYZ Pacer 900
By burnooot in forum AXYZ RoutersReplies: 1Last Post: 27-03-2017, 08:50 PM
Bookmarks