Axyz millennium

[Killiwatt]

Pete, do you have the function processes manual. I have one and could easily scan and upload for you.
I also have two gigantic manuals but one is a studies manual from a school course, haven't gone through that one much yet but not sure how useful it would be.
I also have a complete Toolpath manual and I believe a copy of said as well.
I don't use Toolpath for much so happy to part with one.
Let me know what you think.
I'll check and see what is on the disc I have as well. There is a bunch of support material on there as well.
Ken

[routerdriver]

I remain convinced that Toolpath is a very useful program for sending files to the controller and wouldn't advise exploring it's capabilities beyond that if you have access to a more recent CAM program.In a way,DNC is similar in that it sends the Gcode from the computer to the controller and doesn't involve the archaic process of toolpath creation that is packaged within Toolpath.It does have a certain nostalgia value in that respect.A full list of the various F functions is a handy thing to have and may impress you with the amount of control available with the machine.

[Killiwatt]

One thing that Toolpath was invaluable for was in figuring out what was wrong with my post coming out of Fusion 360.

A simple test rectangle was adding circles at each corner of the part as a means to transition to the next cut instead of just "turning the corner" as one would expect.
Turns out the AXYZ post(version 44083) has a "Built In" maximum circle radius of 1000 which when reduced to 0.001 eliminated the circles at the corners. This can be found under Post Properties, Built Ins.
Nothing would show this anomaly until I opened the code in Toolpath. Then it was as obvious as the day is long.
Now I only use Toolpath to do a quick check of the toolpath to make sure it is clean and to be honest once I figured it out I haven't been back to Toolpath at all.
I'm using DNC exclusively for transfering files to the PC and once they are there I can essentially turn the PC off. I've found the transfer times to be pretty quick but I've yet to do anything really complex.
Did a bunch of test cuts and some path tracing of letters, some chamfering both of features and lines and everything is dead accurate, Very happy at this point.