Threaded View
-
14-10-2023 #1
Hi all,
I like to work on small brass parts mainly for clocks so they can be quite small parts. The parts I work on usually have a thickness of 3.0mm but they can be 1.0mm if I want to machine some clock wheels. Generally I am machining right through the material. My question is can anyone give me some ideas on fixturing as currently I am really struggling. I use bits of wood, usually my project fails because of poor fixturing so I end up making with hand tools.
Regards
Steven
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Work holding - Wax
By matt-b2 in forum Metalwork DiscussionReplies: 3Last Post: 20-06-2020, 07:51 AM -
4th Axis Work Holding For Rectangular Work
By magicniner in forum Workshop & EquipmentReplies: 1Last Post: 20-10-2019, 03:02 AM -
Work Holding Tape/glue
By andy_con in forum Woodwork DiscussionReplies: 11Last Post: 22-07-2016, 06:39 PM -
RFQ: lathe work brass pins small
By dazza in forum Projects, Jobs & RequestsReplies: 7Last Post: 20-01-2015, 03:41 PM -
RFQ: Looking at getting some small parts machined using Brass.
By ryanlownie in forum Projects, Jobs & RequestsReplies: 18Last Post: 26-10-2011, 11:44 PM
Bookmarks