-
15-10-2023 #1
I use MQL on my Bridgeport and out of respect for my lungs switched to cooking oil for a coolant /lubricant about a year ago. At first all seemed to go well but after a few months I became aware of a gummy deposit building up just about everywhere on the mill. Tried everything but could not shift it.
Google research pointed me towards Hexane as a solvent (its used industrially to refine veg oils) and although it makes short work of the raw oil the gum deposits are quite resistant to it.
A chance conversation with a Chemist gave the solution. He had a similar problem using veg oils as a lubricant in pill packaging machinery and spent some time researching it. The issue is nearly all veg oils oxidise to a gum at a relatively low temperature and the gum is so stable its difficult to dissolve.
The solution is to use a coconut oil, specifically fractionated coconut oil which has a lower viscosity and does not oxidise (turn into gum).
All clean and happy in M/C shop now and her indoors says I smell good enough to eat.
It seems the stuff is popular with the soap making brigade (as well as pill encapsulators) and I got a litre for £16 which will last me the best part of a year.
Cheers!
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Used Coolant
By CN-SEE-YA in forum General DiscussionReplies: 1Last Post: 14-07-2021, 09:24 PM -
Who needs coolant????
By Voicecoil in forum Metalwork DiscussionReplies: 6Last Post: 28-01-2021, 11:16 PM -
Coolant, I am not sure which one to go with.
By suesi34e in forum Swarf & Chip ManagementReplies: 23Last Post: 17-10-2015, 07:13 PM -
coolant
By luke11cnc in forum Machine DiscussionReplies: 4Last Post: 11-02-2012, 01:17 PM -
What coolant to use??
By don_jarr in forum General DiscussionReplies: 13Last Post: 05-11-2011, 03:12 PM
Bookmarks