Denford Micromill in good condition.
Bought from Pete on this forum nearly 2 years ago, not getting enough use so I'm making space for a lathe.

Converted the spindle to a variable speed router, and it is now run off a PC running LinuxCNC.

Only issue I have been having recently is the Z-axis gradually moving when the spindle is on.
I think this must be due to interference from the router - maybe needs fresh brushes or some EMF suppression/grounding etc.

Would be looking for 500 with the PC and I'm located in Sheffield (collection only).

Many thanks,
Graham

Click image for larger version. 

Name:	20231206_140215.jpg 
Views:	70 
Size:	250.1 KB 
ID:	32034
Click image for larger version. 

Name:	20231206_140232.jpg 
Views:	74 
Size:	184.2 KB 
ID:	32035
Click image for larger version. 

Name:	20231206_140443.jpg 
Views:	61 
Size:	388.5 KB 
ID:	32033
Click image for larger version. 

Name:	20231206_140244.jpg 
Views:	81 
Size:	157.6 KB 
ID:	32036