Hybrid View
-
06-12-2023 #1
Hello all,
Clearing out, for some new projects….
Going to put this on this on ebay but I thought that I would see if any of this is of use to any members. Items where bought for a project a while ago, that was then managed in a different way - so was never used (In box’s most still sealed). Any questions please ask, I can pack for shipping on a pallet or provide photos etc. if required...
If you go here: https://lang-technik.de/en and enter the part number (45800 for instance in the sarch you will get all the details on each item)
1 x 45800 Quick-Point 96 Ø 176x27mm
1 x 45742 Quick-Point 96,4-fold Plate 384x384x27mm, for 100mm T Slots
1 x 45160 Quick-Point Adaptor Plate, 150 x 126 x 27 mm
16 x 25570 Quick-Point 96, Clamping Studs, Ø 20mm (45570)
1 x 48255-125 Makro-Grip 125, jaw width 125mm, length 260 mm
1 x 48125-2522 Spare Jaws Makro-Grip 125,jaw width 125mm,without holding teeth
1 x 49125 Profilo 125 Base Jaws (To suit 48***)
1 x 48085-77 Makro-Grip 77, jaw width 77 mm, length 102 mm
1 x 48085-7722 Spare Jaws Makro-Grip 77, width 77 mm, for 48085-77, without holding teeth
1 x 49077 Profilo 77 Base Jaws (To suit 48***)
2 x 49258 Profilo 125, Add-On Jaws, steel
2 x 49778 Profilo 77, Add-On Jaws, steel
4 x 49779 Profilo 77, Add-On Jaws, aluminium
4 x Profilo 125, Add-On Jaws, aluminium
1 x 42010 Torque wrench kit for vices and quick points 30-100Nm
1 x 41032 Preci-Point Collet Chuck ER32, incl. cap screw
1 x 41032-03 Clamping Wrench for ER32 Preci-Point Collet Chuck
1 x 41052 Preci-Point Collet Chuck, ER50 incl. cap screw
1 x 41052-03 Clamping Wrench for ER50 Preci-Point Collet Chuck
1 x 45008-20 Quick-Point Cover Discs, Ø 20 mm (20 Pcs)
Cost New £8500+ ex VAT, asking as a lot £5500 +VAT (exc. shipping) but will consider offers....
Any questions please ask…
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Forum post minimum character requirement removed
By Lee Roberts in forum General DiscussionReplies: 3Last Post: 28-07-2017, 03:36 PM -
FOR SALE: pmdx spindle board unused
By dazza in forum Items For SaleReplies: 2Last Post: 24-06-2015, 04:42 PM -
RFQ: Turning requirement
By Sparky in forum Projects, Jobs & RequestsReplies: 0Last Post: 19-01-2015, 08:15 PM -
FOR SALE: Hiwin bearings + rails set unused
By wiatroda in forum Items For SaleReplies: 7Last Post: 14-05-2012, 11:20 AM -
Cheapo Leadscrew with minimum accuracy requirement!
By Vikash in forum Lead Screws, Nuts & SupportsReplies: 16Last Post: 06-10-2010, 11:17 AM
Bookmarks