Thread: Spindle and VFD help
Threaded View
-
14-12-2023 #1
Hi everyone, been a while since I’ve been on here, hope you guys are all good 👍🏼
I’m dealing with an issue that I’m hoping you guys can help me out with, and that is, my VFD setting have all changed/reset their self for what ever reason. I did have a power surge last week so it could be that, protection has been put in place now as it also blew one of my drives.
I’m looking for help on setting up the VFD setting again, what to input as I’ve no idea 😔 manufacturer wouldn’t help either
My setup is as follows
* VFD
Sunfar E380 3 phase,
TYPE - E380-4T0055G/0075P
SOURCE - 3PH 380V 50/60Hz
OUTPUT - 8.6KVA 13A/11KVA 17A
SERIAL NO - A00 6AHXPJFAJ0170
* Spindle
Water cooled 4.5kw
3 phase
24000 rpm
300-400Hz
VFD Manual https://salecnc.com/manuals/Inverter...s%20Manual.pdf
As always the help would be very much appreciated
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
CNC Spindle choice and supply options - 2.2 kw water cooled spindle and VFD
By dogboy in forum Machine DiscussionReplies: 16Last Post: 06-05-2023, 11:44 PM -
Chinese 300W DC spindle - is the spindle shaft grounded?
By HankMcSpank in forum Spindles & Drive MotorsReplies: 44Last Post: 26-11-2016, 07:25 PM -
TB6560 controller Runs spindle on power up When Mach3 plunges spindle stops
By RoyT in forum Spindles & Drive MotorsReplies: 5Last Post: 29-09-2014, 02:42 PM -
CNC Spindle Repair and Spindle Replacement for any Machine of any Manufacturer
By spindeldoctor in forum Manufacturer NewsReplies: 0Last Post: 13-11-2013, 07:50 PM -
Spindle lock mechanism for 2.2kW china spindle
By Jonathan in forum Generic Chinese SpindlesReplies: 8Last Post: 13-08-2012, 08:39 PM
Bookmarks