Thread: Stepper motor replacement ?
Threaded View
-
18-12-2023 #1
Hi everyone,
I have a homemade 6040 cnc router run by a Gecko G540, I recently had a prang in z axis and need to replace the stepper motor.The spec of my motor is Nema23 600oz in 3.5A. 3.9 mh. it came in a kit from the US.I have found a similar motor at Cnc4u uk spec is Nema23 4Nm. 4.2A 3 mh. Will it run ok with my existing mc settings?.I am happy with the holding torque at 4Nm but do not really understand the other specs ,any advice would be much appreciated.
kind regards Phil.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Options for replacement lathe spindle motor
By Doddy in forum Spindles & Drive MotorsReplies: 13Last Post: 16-05-2021, 07:47 AM -
Searching for a replacement for stepper motor driver
By Musi in forum Motor Drivers & ControllersReplies: 1Last Post: 22-10-2020, 11:20 PM -
Servo as a spindle motor replacement - what to look out for?
By Doddy in forum Stepper & Servo MotorsReplies: 23Last Post: 05-10-2020, 10:34 PM -
Myford Ml7R motor capacitor replacement
By RobC in forum Lathes, Lathe Rebuilding & ConversionsReplies: 1Last Post: 30-06-2019, 10:34 AM -
Replacement Stepfour stepper motor
By Ross Shellard in forum Stepper & Servo MotorsReplies: 3Last Post: 15-06-2016, 04:58 PM
Bookmarks