. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 18-12-2023 #2
    m_c's Avatar
    Lives in East Lothian, United Kingdom.
    m_c
    Last Activity: 21 Hours Ago Forum Superstar, has done so much to help others, they deserve a medal. Has a total post count of 2,971. Received thanks 369 times, giving thanks to others 9 times.
    You'll only get that torque if you run at the full current.
    The lower inductance allows faster current changes, which ultimately results in better performance.

    Unless your machine is pushing the motor and driver to their performance limit, the other motor will probably fine.
    Avoiding the rubbish customer service from AluminiumWarehouse since July '13.
    Reply With Quote Reply With Quote

  2. The Following User Says Thank You to m_c For This Useful Post:

« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Options for replacement lathe spindle motor
    By Doddy in forum Spindles & Drive Motors
    Replies: 13
    Last Post: 16-05-2021, 07:47 AM
  2. Searching for a replacement for stepper motor driver
    By Musi in forum Motor Drivers & Controllers
    Replies: 1
    Last Post: 22-10-2020, 11:20 PM
  3. Servo as a spindle motor replacement - what to look out for?
    By Doddy in forum Stepper & Servo Motors
    Replies: 23
    Last Post: 05-10-2020, 10:34 PM
  4. Myford Ml7R motor capacitor replacement
    By RobC in forum Lathes, Lathe Rebuilding & Conversions
    Replies: 1
    Last Post: 30-06-2019, 10:34 AM
  5. Replacement Stepfour stepper motor
    By Ross Shellard in forum Stepper & Servo Motors
    Replies: 3
    Last Post: 15-06-2016, 04:58 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules