Maximat V10P runs out

**Africanimp** · 28-12-2023

Thinking this issue a bit more, shims would not help in my case, as its more a problem with making the headstock move right or left, in my case when viewed from above and looking towards the tailstock I need it to move to the left of the machine?

**Africanimp** · 28-12-2023

Thanks on your comment.

The lathe cupboard was not bolted down when I bought it, seems that my late friend saw no reason to do that?

It is mounted on two thick steel blocks and one each end of the machine, a single bolt in the center keeps things in place.

Click image for larger version.

Name: Maximat V10p steel block mounts.jpg
Views: 1703
Size: 240.8 KB
ID: 32063

**Africanimp** · 28-12-2023

The traveling bed is spot on with the rails that it fits on to, all parts were removed and cleaned, oiled and work really well.

Click image for larger version.

Name: Maximat steel square test.jpg
Views: 1642
Size: 269.2 KB
ID: 32064

**Africanimp** · 28-12-2023

I have a lightly used Stabila level, ok its not calibrated but I am a trained carpenter, so am well used to reading such things.

For sure I see twist in the beds, one end to the other, if I remove the twist would that affect the head