Threaded View
-
27-12-2023 #2
1.5 should be fine, as 9A is within the ratings I can find (vary from 10-19A) depending on application, and I very much doubt you'll be making full use of the 9A constantly.
Personally, for something that's flexing a lot, and with the potential to cost money should it fail, I'd spend the extra money and get some ChainFlex cable from Igus - https://www.igus.co.uk/chainflex/motor-cables
Standard ChainFlex CF885 Motor is £4.02/m or £3.27/m if you buy more than 10m, although that has no oil resistance.
If you want Oil Resistance, then look at something like CF30Avoiding the rubbish customer service from AluminiumWarehouse since July '13.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
AT1 Single Phase to Three Phase Penske Spindle Woes....
By Cozza in forum Spindles & Drive MotorsReplies: 6Last Post: 14-07-2021, 10:01 PM -
FOR SALE: Transwave Static Phase Converter - Single Phase to Three Phase - As New!!
By Matabele in forum Items For SaleReplies: 0Last Post: 10-05-2021, 05:32 PM -
Fuling DZB200 Inverter
By dougie8 in forum Chinese MachinesReplies: 21Last Post: 19-06-2020, 12:36 AM -
3 phase spindle
By terry1956 in forum General DiscussionReplies: 3Last Post: 21-05-2017, 06:46 PM -
er32 spindle thread worn out anything i can do?
By Lloydm in forum General DiscussionReplies: 2Last Post: 01-08-2016, 10:32 PM
Bookmarks