Exotic NSK Linear Motors - what to do with them?..

[Desertboy]

Hey folks - long time lurker on the forum and need some advice.

I’ve some exotic linear motors and a pile of heavy duty extruded aluminium. What to do with them!?

I was going to build a new machine but life gets in the way so time for a clear out. Seems too good to weigh in at the scrappy though.

It was a very high end sampling machine in it’s day. Cost about £500,000 10 years ago.


The linear motors are things of beauty - but they’re a bit beyond me. One is rail is 1500mm other is 1200mm.
The controllers have some literature available but way over my head!

I’ve been tripping over them for 2 years now so need to do something about it.

So what to do - try and get it all working**, weigh it all in, or split for sale?

Anyone have experience with linear motors?


** even if I could figure it out I’ve no idea of torque values or anything else about the motors. It will be super accurate when up and running though - and I bet it crazy fast and fun to play with :o)

You need the datasheet to make it work

https://www.nskamericas.com/en/produ...nocarrier.html

I don't see it, I can't see the drive on the ones you pictured

RS232 is a serial port to talk to a PC, probably so you can program the driver

The IO looks like a parallel port

Sensor is probably for closed loop

But without the datasheet you cannot do a lot with it

You should contact NSK

They will send you the datasheets